Purpose

The | Code to expression type reference set| is designed to enable associations between codes in another code system (other-codes) and SNOMED CT concepts, where the following constraints apply:

Some of the other-codes cannot be mapped to an individual SNOMED CT concept.
Licensing conditions (or other considerations) prevent addition of new SNOMED CT concepts to represent the same meaning as the other-codes.
The other-codes can be logically defined using the SNOMED concept model to represent the same meaning (sufficiently defined) or a similar though less specific meaning (primitive).
Other requirements similar for those applicable to mapping may also apply including:
1. An indication of the degree of correlation between the other-code and the SNOMED CT expression.
2. An indication of whether the other-code was created before any single concept representation of that meaning in SNOMED CT or whether the single concept representation in SNOMED CT predated the creation of the association.

Data Structure

The general approach to the above requirements is to associate each of the other-codes with a representation of the same logic based definition as would have been applied to a SNOMED CT concept with that meaning. However, since the other-code are not identified by an SCTID, the logical definition cannot be represented using defining relationships. There are two potential approaches to this, one would be to use a general purpose description logic language (e.g. OWL) and the other is to use a SNOMED CT expression to represent each definition. The | Code to expression type reference set| is designed to support the expression-based approach.

Field	Data type	Purpose	Mutable	Part of Primary Key
id	UUID	A 128 bit unsigned Integer, uniquely identifying this reference set member. Different versions of a reference set member share the same id but have different effectiveTime. This allows a reference set member to be modified or made inactive (i.e. removed from the active set) at a specified time.	NO	YES (Full /Snapshot)
effectiveTime	Time	The inclusive date or time at which this version of the identified reference set member became the current version. Note: In distribution files the effectiveTime should follow the short ISO date format (YYYYMMDD) and should not include the hours, minutes, seconds or timezone indicator. The current version of this reference set member at time T is the version with the most recent effectiveTime prior to or equal to time T .	YES	YES (Full) Optional (Snapshot)
active	Boolean	The state of the identified reference set member as at the specified effectiveTime . If active = 1 (true) the reference set member is part of the current version of the set, if active = 0 (false) the reference set member is not part of the current version of the set.	YES	NO
moduleId	SCTID	Identifies the SNOMED CT module that contains this reference set member as at the specified effectiveTime . The value must be a subtype of 900000000000443000 \| Module (core metadata concept)\| within the metadata hierarchy.	YES	NO
refsetId	SCTID	Identifies the reference set to which this reference set member belongs. In this case, a subtype descendant of: 705109006 \| Code to expression type reference set\|	NO	NO
referencedComponentId	SCTID	A reference to the SNOMED CT component to be included in the reference set. A subtype of 705113004 \| Terminology system\| identifying the code system from which the code in the mapTarget field is derived. For example: 705114005 \| LOINC Code System\| .	NO	NO
mapSource	String	The other-code which is mapped to the SNOMED CT expression.	NO	NO
expression	String	A SNOMED CT expression that represents the meaning of the other-code. This expression may be a stated or inferred view of the definition provided that documentation of each identified reference set specifies the view provided. The expression must conform to the syntax defined in the SNOMED CT Compositional Grammar - Specification and Guide (http://snomed.org/scg).	YES	NO
definitionStatusId	SCTID	Indicates whether or not the expression contains a sufficient definition of the other-code in the mapSource field. Possible values are the following subtypes of 900000000000444006 \| Definition status\| : 900000000000074008 \|Not sufficiently defined by necessary conditions definition status\| 900000000000073002 \|Sufficiently defined by necessary conditions definition status\|	YES	NO
correlationId	SCTID	The correlation between the other-code and the SNOMED CT expression. Possible values are the following subtypes of 1193546000 \| Map source to map target correlation (foundation metadata concept)\| : 1193552004 \|Map source to map target correlation not specified\| 1193551006 \|Map source not mappable to map target\| 1193550007 \|Partial overlap between map source and target\| 1193549007 \|Narrow map source to broad map target\| 1193548004 \|Exact match between map source and map target\| 1193547009 \|Broad map source to narrow map target\| When these values are applied to this reference set type, the phrase "map source" refers to the other-code. and the "map target" refers to the SNOMED CT expression.	YES	NO
contentOriginId	SCTID	Indication of whether the concept was initially in one of the terminologies (SNOMED CT or other-codes) and added to the other as part of mapping or was in both terminologies at the outset. Values are subtypes of 705116007 \| Original code system source for linked content value\| .	YES	NO

refs

Search

Purpose

Data Structure

Related Links

Search

4.2.15. Code to Expression Reference Set

Purpose

Data Structure

Related Links