Overall Naming Pattern

The basic pattern for

Gloss

PreSpace	false
t	SNOMED CT release file

names consists of five elements, each separated by an underscore (" _ ") and followed by a full stop (" . ") and a file extension:

Code Block

language	erl
theme	Confluence

[FileType]_[ContentType]_[ContentSubType]_[CountryNamespace]_[VersionDate].[FileExtension]

Each element in the above structure is described in more detail by table in the following section.

FileType Element

The FileType element of the filename designates the type and intended use of the

Gloss

PreSpace	false
t	release file

. It consists of a 3 to 5 alphanumeric code with letters in lowercase.

The code comprises the following three sub-elements. The Type sub-element is required in all cases, other elements are required where relevant and otherwise omitted.

Table width manager

Col	140px,140px,1*
Size	fs8

Sub-element

Values

Description

Status

<blank>

General release file

x

Provisional release file (e.g. part of an

Gloss

PreSpace	false
t	alpha
GlosTerm	alpha release package

or

Gloss

PreSpace	false
t	beta release package

).

z

Archival or unsupported file

Type

sct

Terminology Data File

der

Derivative Work Data File (e.g. Reference set release file)

doc

Documentation

res

Implementation Resource Data File (e.g. a data file not following a SNOMED CT standard release file format)

tls

Implementation Resource Tool (e.g. scripts or other software made available to process a release file)

Format

1

Release Format 1

2

Release Format 2

<blank>

Not specific to a release version

ContentType Element

The ContentSubType element is mandatory for all FileTypes. It describes the content and purpose of the file. It consists of 2-48 alphanumeric characters in camel case.

The content of this element depends on the first element (FileType) of the filename, as described below:

Table width manager

Col	140px,1*
Size	fs8

Value

Usage

Concept

The file conforms to the 4.2.1 Concept File Specification and contains data related to a set of

Gloss

PreSpace	false
t	concepts

.

Relationship

The file conforms to the 4.2.3 Relationship File Specification and contains

Gloss

PreSpace	false
t	relationships

that represent the

Gloss

PreSpace	false
t	distribution normal form

Gloss

PreSpace	false
t	inferred view

of a set of concept definitions.

sRefset

The file conform to the single string reference set format. This only applies to the OWL Expression Reference Set and followed by the content sub-element _OWLExpression which contains stated

Gloss

t	concept definitions

represented as

Gloss

t	OWL axioms

and additional

Gloss

t	OWL ontology

information.

Description

The file conforms to the 4.2.2 Description File Specification and contains at set of

Gloss

PreSpace	false
t	descriptions

with description types

Concept

ShowParts	term
t	900000000000013009 Synonym

and

Concept

ShowParts	term
t	900000000000003001 Fully specified name

.

Note that both these description types have a maximum

Specref

PreSpace	false
t	term

length of 255 characters.

TextDefinition

The file conforms to the 4.2.2 Description File Specification and contains at set of

Gloss

PreSpace	false
t	descriptions

with description type .

Note: This description type has a maximum

Specref

PreSpace	false
t	term

length of 4096 characters.

StatedRelationship

The file conforms to the 4.2.3 Relationship File Specification and contains

Gloss

PreSpace	false
t	relationships

that represent the

Gloss

PreSpace	false
t	stated view

of a set of concept definitions.

Note: It is likely this file will be phased out and replaced with a reference set containing a richer OWL representation of stated concept definition.

Identifier

The file conforms to the 4.2.4 Identifier File Specification.

Note: This file does not contain any data rows in the International Edition.

Table width manager

Col	140px,1*
Size	fs8

Value

Description

Refset

The file conforms to the 5.2.1.1 Simple Reference Set specification and contains the members of one or more simple reference sets.

<pattern>Refset

The file conforms to the 5.1.1 Basic Reference Set Member File Format and include one or more additional columns, The number and order of the columns and their basic data types are specified by the <pattern> which precedes Refset.

The <pattern> consists of a sequence of lowercase letters each of which represent an additional column with a datatype specified by the letter as listed below

Pattern letter

c

A SNOMED CT component identifier (

Gloss

PreSpace	false
t	SCTID

) referring to a concept, description or relationship.

i

A signed integer.

s

A UTF-8 text string.

Examples

cRefset : A refset with one additional column containing a component identifier. This pattern supports refset types including: 5.2.1.3 Attribute Value Reference Set, 5.2.4 Language Reference Set and 5.2.1.4 Association Reference Set).
ciRefset : A refset with two additional columns, one containing a component identifier and one containing an integer. This pattern supports refset types including: 5.2.1.5 Ordered Association Reference Set.
sRefset : A refset with one additional column containing a string. This pattern supports refset types including: 5.2.3.1 Simple Map from SNOMED CT Reference Set, 5.2.3.2 Simple Map to SNOMED CT Reference Set and 5.2.1.6 DEPRECATED: Annotation Reference Set.

Table width manager

Col	140px,1*
Size	fs8

FileType

Value and Description

doc

The title of the document in CamelCase, abbridges if necessary to fit within the length constraint.

Note: Abbreviations should not be used unless they are essential to fit the title within the available length.

Examples of ContentType for Documents

doc_SnomedDecisionSupport_Current-en-US_INT_20170331.pdf (Title: Decision Support with SNOMED CT)
doc_SearchDataEntryGuide_Current-en-US_INT_20171122 (Title: SNOMED CT Search and Data Entry Guide)

res

tls

The value of the ContentType element may be determined on a case-by-case basis but, in conjunction with the ContentSubType element, should be adequate to identify the content and purpose of the file.

ContentSubType Element

The ContentSubType element is mandatory for all FileTypes. It provides additional information to describe the content and purpose of the file, including the

Gloss

PreSpace	false
t	language

/

Gloss

PreSpace	false
t	dialect

, where appropriate. Its format is 2-48 alphanumeric characters in camel case (except for the capitalization rules specified below for

Gloss

PreSpace	false
t	language

code). Hyphen (" - ") is a permitted character in conjunction with a language code, as described below.

Table width manager

Col	140px,140px,1*
Size	fs8

Sub-elements	Values	Description
Summary		An optional short camel case summary of the usage of the file. The value of this sub-element may be determined on a case-by-case basis but, in conjunction with the ContentType element, should be adequate to identify the content and purpose of the file. Examples: For references sets a brief indication about the type or purpose the reference set(s) in the file. Note: If there is a summary the ReleaseType or DocStatus follows this Summary sub-element immediately without a space or other separator.
ReleaseType	Full	The file contains the Full view of the components or refset members within its scope (i.e. every version ever released).
	Snapshot	The file contains the Snapshot view of the components or refset members within its scope (i.e. only the most recent version released).
	Delta	The file contains the Delta view of the components or refset members within its scope (i.e. only additions/changes since previous release).
LanguageCode		Where it is necessary to specify the language or dialect used in a file, the appropriate language code must be included as the final sub-element of the ContentSubType. If a Summary or DocStatus sub-element is also included, the LanguageCode must be added after the last of those sub-elements and must be separated from it by a hyphen. Representation of the LanguageCode The language is specified with a 2 character ISO 639-1 language code (e.g. es = Spanish, fr = French, da = Danish). If necessary, a dialect code is added after the language code and separated from it by a hyphen. Depending on the specificity required the dialect code comes from one of two sources: If the dialect is general to an entire country, the two-letter ISO-3166 alpha-2 country code is used to specify the dialect (e.g. en-US = US English, en-GB British English) If dialect is less common or not country specific, the IANA language subtag should be used. Note this code consists strings of lower case letres letters. IANA is the Internet Assigned Numbers Authority. This approach follows Internet conventions.

Table width manager

Col	140px,140px,1*
Size	fs8

Sub-elements	Values	Description
Summary		An optional short camel case addition to the ContentType title. If there is a Summary the DocStatus follows this Summary sub-element immediately without a space or other separator.
DocStatus	Current	The document is up-to-date and complete for the current release of SNOMED CT, as indicated by the VersionDate element.
	Draft	The document is a draft version; it may be incomplete and has not been approved in a final version.
	Review	The document has been released for review and comments from SNOMED International Members, Affiliates and other stakeholders.
LanguageCode		Where it is necessary to specify the language or dialect used in a file, the appropriate language code must be included as the final sub-element of the ContentSubType. If a Summary or DocStatus sub-element is also included, the LanguageCode must be added after the last of those sub-elements and must be separated from it by a hyphen. Representation of the LangageCode is described in detail in the final row of .

Table width manager

Col	140px,1*
Size	fs8

Sub-elements	Values and Description
Summary	The value of this sub-element may be determined on a case-by-case basis but, in conjunction with the ContentType element, should be adequate to identify the content and purpose of the file.
LanguageCode	If it is necessary to specify the language or dialect used in a resource data file or tool, the appropriate language code must be included as the final sub-element of the ContentSubType. If a Summary sub-element is also included, the LanguageCode must be added after the Summary sub-element and must be separated from it by a hyphen. Representation of the LangageCode is described in detail in the final row of .

Examples of ContentSubType

der2_cRefset_AttributeValueSnapshot_INT_20180131.txt
- Summary=AttributeValue (type of refset),
- Release type=Snapshot,
- Language not stated
sct2_Description_Snapshot-en_INT_20180131.txt
- Release type=Snapshot,
- Language=English
der2_cRefset_LanguageSnapshot-en_INT_20180131.txt
- Summary=Language (type of refset),
- Release type=Snapshot,
- Language=English
doc_IhtsdoGlossary_Current-en-US_INT_20170817.pdf
- DocStatus=Current,
- Language=en-US.

CountryNamespace Element

The CountryNamespace element is mandatory for all FileTypes. It identifies the organization responsible for developing and maintaining the file. It is a string of 2 to 10 alphanumeric characters consisting of the two sub-elements described below. At least one of these two sub-elements must be present.

Gloss

PreSpace	false
t	SNOMED International

or a

Gloss

PreSpace	false
t	National Release Center (NRC)
GlosTerm	National Release Center

may optionally include both sub-elements where they consider this to be appropriate.

Table width manager

Col	140px,140px,1*
Size	fs8

Sub-element

Values

Description

CountryCode

INT

The file is maintained and distributed by SNOMED International.

AA to ZZ

The file is maintained and distributed by the

Gloss

PreSpace	false
t	NRC
GlosTerm	National Release Center

for the country represented by this ISO-3166 alpha-2 country code. The code consists of exactly two uppercase characters from the latin alphabet.

<blank>

The file is maintained and released by an SNOMED CT extension provider that is not an NRC.

NamespaceId

0000000 to 9999999

The file is maintained and released by an SNOMED CT extension provider that is not an NRC. In which case, this value is a 7 digit

Gloss

PreSpace	false
t	namespace identifier

allocated to that organization by SNOMED International.

The file is maintained and distributed by either SNOMED International or an NRC and the distributing organization has chosen to include the namespace identifier to indicate that this is part of a release restricted to content in a single namespace.

<blank>

The file is maintained and distributed by either SNOMED International or an NRC and the distributing organization has not chosen to include the namespace identifier to indicate that this is part of a release restricted to content in a single namespace.

VersionDate Element

The VersionDate element is mandatory for all FileTypes. It identifies the

Gloss

PreSpace	false
t	SNOMED CT

version with which the file is intended to be used. Its format is an 8-digit number in the pattern "YYYYMMDD", in compliance with the ISO-8601 standard.

For Data Files(sct,der or res),and for Documentation (doc) with a status tag value of "Current", the value of this element should always be the same as the
Gloss
PreSpace false
t SNOMED CT
version date with which the file is associated.
For other file types, the VersionDate element will identify the (past) date of the
Gloss
PreSpace false
t SNOMED CT release
for which the file was intended. A file distributed with a past version date has not been updated to reflect changes to
Gloss
PreSpace false
t SNOMED CT
since that date, nor has it been validated as correct or appropriate for current use.

File Extension

The extension element of the filename identifies the file format (encoding convention) of the file, such as " txt ", " pdf " or " zip ". It has a format of 1-4 alphanumeric characters.

Table width manager

Col	140px,140px,1*
Size	fs8

FileType	Values	Description
sct or der	txt	All RF2 formatted release files are distributed as plain text UTF-8 files with the .txt suffix.
doc	pdf	Portable Document Format is the default format for documents distributed and made available for download in a format suitable for local viewing or printing.
doc	<other>	Other document formats including plain text (.txt) and HTML (.html) may be used where deemed appropriate. In all cases the file extension (suffix) used should be one of the widely recognized format. Unless there are exceptional requirements, the format should be accessible using freely available software.
res	txt	Most resources should be provided as plain text UTF-8 files with the .txt suffix.
	zip	Where appropriate a resource file, or a collection of such files, may be distributed as zip archive.
	<other>	Other data formats may be used where appropriate.
tls	<any>	No specific statements are made about the file extsions to be used for tooling files. However, in general such tools should be provided in a format that does not compromise system security. In most cases, tools should be provided through an interface such as GitHub and should not be included as part of general releases of the terminology.

Search

Versions Compared

Old Version 26

New Version 27

Key

Overall Naming Pattern

FileType Element

ContentType Element

ContentSubType Element

Examples of ContentSubType

CountryNamespace Element

VersionDate Element

File Extension

Search

Page History

Versions Compared

Old Version 26

New Version 27

Key

Overall Naming Pattern

FileType Element

ContentType Element

ContentSubType Element

Examples of ContentSubType

CountryNamespace Element

VersionDate Element

File Extension