Dear all,
The Production release of the April 2018 SNOMED CT® Spanish Edition is now available from the MLDS distribution site. This release contains the Spanish language version of the January 2018 SNOMED CT® International Edition.
All files distributed for the April 2018 SNOMED CT® Spanish Edition are available from the “April 2018 v1.0” version in the “SNOMED CT Spanish package - Edición en Español” project, which can be found on the “SNOMED International Releases” page in MLDS, accessed here:
https://mlds.ihtsdotools.org/#/ihtsdoReleases
The SNOMED CT® Spanish Edition Production release is distributed as a single zipped file archive:
- SnomedCT_SpanishRelease-es_Production_20180430T120000Z.zip
The Release Notes and Starter Guide have been separated from the Spanish Edition package, and can be viewed online on SNOMED International’s Release Management Confluence website:
- Release Notes: https://confluence.ihtsdotools.org/pages/viewpage.action?pageId=59348753
- Starter Guide: https://confluence.ihtsdotools.org/pages/viewpage.action?pageId=59348706
The Release Notes have also been published as a .pdf file alongside the release package, in the same MLDS repository.
If you have any questions about the April 2018 SNOMED CT® Spanish Edition Production release, or have difficulties downloading the files, please contact SNOMED International at support@snomed.org with “April 2018 Spanish Edition Production release” in the subject line.
Kind regards,
Andrew Atkinson | Release Manager
Dear Members,
The BETA release of the April 2018 SNOMED CT® Spanish Edition is now available to SNOMED International Members only, from the MLDS distribution site. This release contains the Spanish language version of the January 2018 SNOMED CT® International Edition.
The BETA release is distributed for evaluation purposes only. It is not for use in production clinical systems or in clinical settings.
This BETA release provides SNOMED International Member organisations an opportunity to perform a technical evaluation of the SNOMED CT® files, and to provide feedback to SNOMED International, before the Production Spanish Edition is published by 30th April 2018. Please note that this Release should not be distributed to Affiliate Licensees or any third parties before this date.
USE WITHIN CLINICAL SYSTEMS CANNOT BE SUPPORTED AT THIS TIME.
When providing feedback, please include as much detail as possible, incorporating references to, or samples of, specific instances of the issue being reported. The absence of sufficient information to allow SNOMED International to confirm the reported issue may result in no action being taken prior to the Production release. Feedback on content related issues will be assessed and prioritised by SNOMED International, and a decision will be made as to whether to address any reported content issues for this release or as part of a future Spanish Edition release. Although all feedback will be carefully reviewed, there should be no expectation that any non-technical issues will be addressed prior to the distribution of the Production release.
Feedback on the BETA release files will be accepted until 23:59 UTC on 25th April 2018 – although Members are urged to submit their findings as early as possible.
All files distributed to SNOMED International Members for the April 2018 Spanish Edition BETA release are available from the "April 2018 v0.1” version in the “Offline & Alpha Versions” section of the “SNOMED CT Spanish package - Edición en Español” project, which can be found on the “SNOMED International Releases” page in MLDS, accessed here:
https://mlds.ihtsdotools.org/#/ihtsdoReleases
The SNOMED CT® Spanish Edition BETA release is distributed as a single zipped file archive:
xSnomedCT_SpanishRelease-es_BETA_20180430T120000Z.zip
The Release Notes and Starter Guide have been separated from the Spanish Edition package, and can be reviewed online here, on SNOMED International’s Release Management Confluence website:
- Release Notes: https://confluence.ihtsdotools.org/pages/viewpage.action?pageId=59348753
- Starter Guide: https://confluence.ihtsdotools.org/pages/viewpage.action?pageId=59348706
The Release Notes will also be published as a .pdf file alongside each release, in the same MLDS repository.
If you have any questions about the April 2018 Spanish Edition BETA release, or have difficulties downloading the files, please contact SNOMED International at support@snomed.org with “April 2018 Spanish Edition BETA release” in the subject line.
Kind regards,
Andrew Atkinson | Release Manager
Dear all,
The Production release of the January 2018 ICNP to SNOMED CT® (Interventions) package is now available, from the MLDS distribution site.
This package may be distributed to Affiliate Licensees and third parties at any time, within the relevant licensing restrictions. The Production release of the ICNP to SNOMED CT® (Interventions) package is dependent upon, and should therefore be consumed in conjunction with the January 2018 SNOMED CT® International Edition.
All files distributed are available from the “January 2018 v1.0 (Interventions)” version in the “International Classification of Nursing Practice (ICNP) to SNOMED CT package” project, which can be found on the “IHTSDO Releases” page in MLDS, accessed here:
https://mlds.ihtsdotools.org/#/ihtsdoReleases
The ICNP to SNOMED CT® (Interventions) package contains SNOMED CT files in Release Format 2 (RF2) only, distributed in a zipped file archive:
- SnomedCT_ICNPInterventionsRelease_PRODUCTION_20180420T120000Z.zip
The Release Notes have been separated from the release package, and so can be downloaded as a distinct pdf file from the same MLDS release version:
- doc_SnomedCT-ICNPInterventions-ReleaseNotes_Current-en-US_INT_20180131.pdf
The Release Notes can also be accessed online from the following page:
Those Members using MLDS as their distribution site will find that their affiliates have access to the new release automatically.
If you have any questions about the January 2018 ICNP to SNOMED CT® (Interventions) package, or have difficulties downloading the files from the distribution site, please contact SNOMED International at support@snomed.org with “January 2018 ICNP to SNOMED CT® (Interventions) package release question” in the subject line.
Kind regards,
Andrew Atkinson | Release Manager
Dear all,
The Production release of the January 2018 ICNP to SNOMED CT® (Diagnoses) package is now available, from the MLDS distribution site.
This package may be distributed to Affiliate Licensees and third parties at any time, within the relevant licensing restrictions. The Production release of the ICNP to SNOMED CT® (Diagnoses) package is dependent upon, and should therefore be consumed in conjunction with the January 2018 SNOMED CT® International Edition.
All files distributed are available from the “January 2018 v1.0 (Diagnoses)” version in the “International Classification of Nursing Practice (ICNP) to SNOMED CT package” project, which can be found on the “IHTSDO Releases” page in MLDS, accessed here:
https://mlds.ihtsdotools.org/#/ihtsdoReleases
The ICNP to SNOMED CT® (Diagnoses) package contains SNOMED CT files in Release Format 2 (RF2) only, distributed in a zipped file archive:
- SnomedCT_ICNPDiagnosesRelease_PRODUCTION_20180420T120000Z.zip
The Release Notes have been separated from the release package, and so can be downloaded as a distinct pdf file from the same MLDS release version:
- doc_SnomedCT-ICNPDiagnoses-ReleaseNotes_Current-en-US_INT_20180131.pdf
The Release Notes can also be accessed online from the following page:
Those Members using MLDS as their distribution site will find that their affiliates have access to the new release automatically.
If you have any questions about the January 2018 ICNP to SNOMED CT® (Diagnoses) package, or have difficulties downloading the files from the distribution site, please contact SNOMED International at support@snomed.org with “January 2018 ICNP to SNOMED CT® (Diagnoses) package release question” in the subject line.
Kind regards,
Andrew Atkinson | Release Manager
January 2018 GP/FP SNOMED CT Reference Sets and SNOMED CT to ICPC-2 Map Production release available
Dear all,
The Production release of the January 2018 General Practitioner/Family Practitioner (GP/FP) SNOMED CT® Reference Sets and SNOMED CT® to ICPC-2 Map package is now available, from the MLDS distribution site.
This package may be distributed to Affiliate Licensees and third parties at any time, within the relevant licensing restrictions. The Production release of the GP/FP SNOMED CT® Reference Sets and SNOMED CT® to ICPC-2 Map package is dependent upon, and should therefore be consumed in conjunction with the January 2018 SNOMED CT® International Edition.
All files distributed are available from the “January 2018 v1.0” version in the “GP/FP SNOMED CT Refset and SNOMED CT to ICPC2 Map package - SNOMED International” project, which can be found on the “IHTSDO Releases” page in MLDS, accessed here:
https://mlds.ihtsdotools.org/#/ihtsdoReleases
The GP/FP SNOMED CT® Reference Sets and SNOMED CT® to ICPC-2 Map package contains SNOMED CT files in Release Format 2 (RF2) only, distributed in a zipped file archive:
- SnomedCT_GPFPICPC2_PRODUCTION_20180416T120000Z.zip
The Release Notes have been separated from the release package, and so can be downloaded as distinct pdf files from the same MLDS release version:
- doc_SnomedCT-GPFP-Production-ReleaseNotes_Current-en-US_INT_20180131.pdf
- doc_SnomedCT-ICPC2-Production-ReleaseNotes_Current-en-US_INT_20180131.pdf
The Release Notes can also be accessed online from the following pages:
- General Practitioner/Family Practitioner (GP/FP) Reasons for Encounter/Health Issues SNOMED CT package Release Notes - January 2018
- SNOMED CT Refset to ICPC-2 Map Release Notes - January 2018
Those Members using MLDS as their distribution site will find that their affiliates have access to the new release automatically.
If you have any questions about the January 2018 GP/FP SNOMED CT® Reference Sets and SNOMED CT® to ICPC-2 Map package, or have difficulties downloading the files from the distribution site, please contact SNOMED International at support@snomed.org with “January 2018 GP/FP SNOMED CT® Reference Sets and SNOMED CT® to ICPC-2 Map package release question” in the subject line.
Kind regards,
Andrew Atkinson | Release Manager
Dear all,
The Production release of the January 2018 SNOMED CT® Nursing Health Issues refset package is now available, from the MLDS distribution site.
All files distributed are available from the “January 2018 v1.0 (Nursing Health Issues refset)” version in the “SNOMED CT Nursing refset packages - SNOMED International” project, which can be found on the “IHTSDO Releases” page in MLDS, accessed here:
https://mlds.ihtsdotools.org/#/ihtsdoReleases
The SNOMED CT® Nursing Health Issues refset package contains SNOMED CT files in Release Format 2 (RF2) only, distributed in a zipped file archive:
- SnomedCT_NursingHealthIssues_PRODUCTION_20180408T120000Z.zip
The Release Notes have been separated from the Release package, and can be downloaded as distinct files from the same MLDS release version:
- doc_SnomedCT-NursingHealthIssues-ReleaseNotes_Current_en-US_INT_20180131.pdf
The Release Notes can also be accessed online:
SNOMED CT Nursing Health Issues Reference Set Release Notes - January 2018
Those Members using MLDS as their distribution site will find that their affiliates have access to the new release automatically.
If you have any questions about the January 2018 SNOMED CT® Nursing Health Issues refset package, or have difficulties downloading the files from the distribution site, please contact SNOMED International at support@snomed.org with “January 2018 SNOMED CT® Nursing Health Issues refset package release question” in the subject line.
Kind regards,
Andrew Atkinson | Release Manager
Dear all,
The Production release of the January 2018 SNOMED CT® Nursing Activities refset package is now available, from the MLDS distribution site.
All files distributed are available from the “January 2018 v1.0 (Nursing Activities refset)” version in the “SNOMED CT Nursing refset packages - SNOMED International” project, which can be found on the “IHTSDO Releases” page in MLDS, accessed here:
https://mlds.ihtsdotools.org/#/ihtsdoReleases
The SNOMED CT® Nursing Activities refset package contains SNOMED CT files in Release Format 2 (RF2) only, distributed in a zipped file archive:
- SnomedCT_NursingActivities_PRODUCTION_20180408T120000Z.zip
The Release Notes have been separated from the Release package, and can be downloaded as distinct files from the same MLDS release version:
- doc_SnomedCT-NursingActivities-ReleaseNotes_Current_en-US_INT_20180131.pdf
The Release Notes can also be accessed online:
SNOMED CT Nursing Activities Reference Set Release Notes - January 2018
Those Members using MLDS as their distribution site will find that their affiliates have access to the new release automatically.
If you have any questions about the January 2018 SNOMED CT® Nursing Activities refset package, or have difficulties downloading the files from the distribution site, please contact SNOMED International at support@snomed.org with “January 2018 SNOMED CT® Nursing Activities refset package release question” in the subject line.
Kind regards,
Andrew Atkinson | Release Manager
Dear all
In future releases of the ICNP to SNOMED CT packages, we will be refining the file naming convention, in order to better distinguish between the two releases: Diagnoses and Interventions.
Therefore, instead of the Concept file, for example, being called "sct2_Concept_ICNPSnapshot_INT_20180131.txt" in both packages, it will now be called the following in each relevant release:
- sct2_Concept_ICNPDiagnosesSnapshot_INT_[date].txt
- sct2_Concept_ICNPInterventionsSnapshot_INT_[date].txt
This change will be implemented for all ICNP releases going forward - please let us know if you have any questions or concerns over this change.
Kind regards,
Andrew Atkinson | Release Manager
Dear all,
The Production release of the SNOMED CT® General Dentistry Diagnostic refset package is now available, from the MLDS distribution site.
All files distributed are available from the “January 2018 v1.0” version in the “SNOMED CT General Dentistry Diagnostic refset package - SNOMED International” project, which can be found on the “IHTSDO Releases” page in MLDS, accessed here:
https://mlds.ihtsdotools.org/#/ihtsdoReleases
The SNOMED CT® General Dentistry Diagnostic refset package contains SNOMED CT files in Release Format 2 (RF2) only, distributed in a zipped file archive:
- SnomedCT_GeneralDentistry_PRODUCTION_20180331T120000Z.zip
The Release Notes have been separated from the Release package, and can be downloaded as distinct files from the same MLDS release version:
- doc_SnomedCT-GeneralDentistry-ReleaseNotes_Current_en-US_INT_20180131.pdf
The Release Notes can also be accessed online:
SNOMED CT General Dentistry Diagnostic refset package Release Notes - January 2018
Those Members using MLDS as their distribution site will find that their affiliates have access to the new release automatically.
If you have any questions about the January 2018 SNOMED CT® General Dentistry Diagnostic refset package, or have difficulties downloading the files from the distribution site, please contact SNOMED International at support@snomed.org with “January 2018 SNOMED CT® General Dentistry Diagnostic refset package release question” in the subject line.
Kind regards,
Andrew Atkinson | Release Manager
Dear all,
The Production release of the January 2018 SNOMED CT® Odontogram refset package is now available, from the MLDS distribution site.
All files distributed are available from the “January 2018 v1.0” version in the “SNOMED CT Odontogram refset package - SNOMED International” project, which can be found on the “IHTSDO Releases” page in MLDS, accessed here:
https://mlds.ihtsdotools.org/#/ihtsdoReleases
The SNOMED CT® Odontogram refset package contains SNOMED CT files in Release Format 2 (RF2) only, distributed in a zipped file archive:
- SnomedCT_Odontogram_PRODUCTION_20180331T120000Z.zip
The Release Notes have been separated from the Release package, and can be downloaded as distinct files from the same MLDS release version:
- doc_SnomedCT-Odontogram-ReleaseNotes_Current_en-US_INT_20180131.pdf
The Release Notes can also be accessed online:
SNOMED CT Odontogram refset package Release Notes - January 2018
Those Members using MLDS as their distribution site will find that their affiliates have access to the new release automatically.
If you have any questions about the January 2018 SNOMED CT® Odontogram refset package, or have difficulties downloading the files from the distribution site, please contact SNOMED International at support@snomed.org with “January 2018 SNOMED CT® Odontogram refset package release question” in the subject line.
Kind regards,
Andrew Atkinson | Release Manager